EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE

EPEVER SOLAR Cost CONTROLLER Set up: TRACER AN SERIES CONTROLLE

Blog Article

The EPEVER Tracer AN Series Photo voltaic Demand Controller is often a very economical solar controller designed for off-grid solar methods. Based upon multiphase synchronous rectification engineering, it makes certain optimized Electricity conversion and system steadiness for a wide array of photovoltaic (PV) programs.

Critical Features of the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Solar Cost Controller know-how for remarkable solar Electrical power harvesting. Critical characteristics contain:

Multiphase Synchronous Rectification (MSR) for enhanced Vitality conversion.
State-of-the-art MPPT Algorithm with >99% effectiveness.
Dual-Phase Charging for Improved battery daily life.
Liquid crystal display Screen with true-time facts checking.
Many Load Command Modes which includes guide and timer.
Thorough Electronic Protections in opposition to overcharging, above-discharging, limited circuits, and reverse polarity.
Phase-by-Phase Guidebook to Creating the EPEVER Tracer AN Sequence Controller
one. Unboxing and Getting ready the Controller
Make sure all components are included: Tracer AN device, temperature sensor, communication cables, and user handbook.
Verify the product quantity and voltage ratings match your solar panel and battery requirements.
two. Mounting the Cost Controller
Decide on a very well-ventilated, dry locale near the battery financial institution.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Manage good clearance for warmth dissipation.
three. Wiring the Photo voltaic Charge Controller
Caution: Usually observe good protection protocols and make sure the process is run off right before connecting components.

Move one: Hook up the battery terminals on the charge controller (beneficial to positive, adverse to damaging).
Stage two: Hook up the solar panel array to the PV enter terminals.
Step 3: Join the load terminals if using a direct load relationship.
Phase 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Options
Power over the controller by connecting the battery initially.
Use the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Handbook, timer, mild control.
five. Checking and Details Logging
The Tracer AN Collection supports genuine-time monitoring utilizing the MT50 remote meter.
Data is often logged by using the RS485 interaction port working with application for instance Photo voltaic Station Computer system.
Distant checking is achievable With all the EPEVER WiFi module.
6. Troubleshooting Widespread Concerns
Challenge More info 1: No Electricity Output

Verify battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Concern 2: In excess of-Voltage Protection

Confirm the solar array’s voltage rating.
Modify system parameters if needed.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Confirm MPPT options from the menu.
Advantages of the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification technological know-how assures:

Increased Effectiveness: Lessened Strength losses during conversion.
Improved Reliability: Steady general performance below variable hundreds.
Lengthier Battery Lifetime: Consistent and precise charging profiles.
Summary
The EPEVER Solar Cost Controller with multiphase synchronous rectification technological know-how is really an Outstanding option for optimizing solar energy generation and lengthening battery life. By adhering to the above mentioned setup guidebook, buyers can make certain most performance and technique longevity.